INTEGRA YORK PA INC.
Mfg Item # : 4-325
Scalpel Blades, Sterile Stainless steel. Sterilized by gamma radiation. Individually sealed in foil peel packs. Blade: 25.
Exact Match: 21909-652

BLADE ONLY for WAR/03548 assy.

Dynalab Corporation
Mfg Item # : 312554-0001
Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

KINFE SET STATIONARY SET 4 Exact Match 10012-932

Stationary Knives Made of tool steel with in-laid hardened edges. For use with Thomas-Wiley mini-mills 48953-007 -008 . Exact Match 48955-002

ASPEN SURGICAL PRODUCTS, INC.
Mfg Item # : 371310
Carbon Rib-Back Blades Size 10, Non-Sterile, 25 Strips Of 6/Case
Exact Match: 89176-370

Eberbach Corporation
Mfg Item # : E8670
1224E43: As supplied with blending containers #8440, 8442, 8490, 8500, 8510 and 8520.- Assembly has S/S blades- Blade diameter is 2-3/8". Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E44: All Stainless Steel, Standard Size Blending Assembly, Order No. 8672. Like 8670, but ALL stainless steel blades, bearing holder, shaft, bearing cap and cap nut. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E45: All Stainless Steel, Small Size Blending Assembly, Order No. 8712. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E46: All Stainless Steel, Semi micro Blending Assembly, Order No. 8732. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E47: Waring® 4-Liter Blending Assembly, Order No. 8660. Less washer and lock nut; for #8020 Waring 4-Liter container. Suitable for aqueous blending applications 1224E48: Harsh Condition 4- Liter Blending Assembly, Order No. 8661. Less washer and lock nut. Suitable when using liquids that would otherwise attack the nitrile seals of the standard 4-liter assemblies

VWR International 55411-055
VWR* Razor Blades Single-edge industrial razor blades are machine-honed from hard carbon steel, then wrapped individually to protect users. Thickness: 0.30mm.