PAPER FILTER Qualitative High Purity Grade 613 11 cm circle 100/pk Exact Match 71440-010

Carton of 5,000

Cytiva - Whatman 1001-110 Grade 1 Filter Paper
11.0cm diameter. For a wide range of laboratory applications, liquid clarification, gas filtration, air pollution analysis, and soil analysis. Medium porosity. Medium flow rate. 11um particle retention. Exact Match 28450-106

Cytiva - Whatman 1002-110 Grade 2 Filter Paper
11.0cm diameter. More retentive, slower, and more absorbent than Grade 1 Filter Paper by Whatman*. For general-purpose lab applications, monitoring specific contaminants in the atmosphere, and soil testing. Medium porosity. Medium flow rate. 8um particle retention. Exact Match 28455-110

Cytiva - Whatman 1003-110 Grade 3 Filter Paper
11.0cm diameter. Slightly grained surface. Moderately thick. Highly absorbent. Highly suitable for use in Buchner funnels. Medium porosity. Medium flow rate. 6um particle retention. Exact Match 28456-087

FILTER PAPER Quantitative Ashless Grade 54 11 cm circle 100/pk Exact Match 47745-732

Advantec MFS Part No. N04A11.0CM
Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and Fe2O3. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Grade No. 4A Hardened is further treated with nitric acid. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Ash Content: 0.01% (except Grade No. 4A is 0.025%). Grade No. 3 Medium retention, fast flow rate paper with good chemical resistance and wet strength. Recommended for analysis of soils, fertilizers, cement, and minerals. Nominal Retention: 5 µm. Grade No. 5A Retains coarse and gelatinous ppt with high flow rates. Filter hydroxides, metalic aerosols, environmetnal monitoring, and determine silica content in steel. Nominal Retention: 7 µm. Grade No. 5B Retains medium size ppt such as CaCo3, PbSO4, AgCl. General purpose paper. Nominal Retention: 4 µm. Grade No. 5C High retention efficiency collecting fine ppt such as BaSO4 with slow flow rate. Gravimetric analysis and collecting particles that tend toward colloidal dispersion. Nominal Retention: 1 µm. Grade No. 6 Retains medium-fine particulates. Use for precision analysis of trace and precious metals, beverages, water. Nominal Retention: 3 µm. Grade No. 7 Highest purity paper for medium particulates. Fast flow rate. Recommended for precise gravimetric analysis of minute trace and precious metals. Nominal Retention: 4 µm. Grade No. 4A Hardened, smooth low ash paper with superior wet strength. Retains fine crystalline ppt with slow flow rate. Suitable for Buchner filtrations, high pressure, high chemical and pH resistance. Nominal Retention: 1 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : N05B11.0CM
Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and Fe2O3. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Grade No. 4A Hardened is further treated with nitric acid. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Ash Content: 0.01% (except Grade No. 4A is 0.025%). Grade No. 3 Medium retention, fast flow rate paper with good chemical resistance and wet strength. Recommended for analysis of soils, fertilizers, cement, and minerals. Nominal Retention: 5 µm. Grade No. 5A Retains coarse and gelatinous ppt with high flow rates. Filter hydroxides, metalic aerosols, environmetnal monitoring, and determine silica content in steel. Nominal Retention: 7 µm. Grade No. 5B Retains medium size ppt such as CaCo3, PbSO4, AgCl. General purpose paper. Nominal Retention: 4 µm. Grade No. 5C High retention efficiency collecting fine ppt such as BaSO4 with slow flow rate. Gravimetric analysis and collecting particles that tend toward colloidal dispersion. Nominal Retention: 1 µm. Grade No. 6 Retains medium-fine particulates. Use for precision analysis of trace and precious metals, beverages, water. Nominal Retention: 3 µm. Grade No. 7 Highest purity paper for medium particulates. Fast flow rate. Recommended for precise gravimetric analysis of minute trace and precious metals. Nominal Retention: 4 µm. Grade No. 4A Hardened, smooth low ash paper with superior wet strength. Retains fine crystalline ppt with slow flow rate. Suitable for Buchner filtrations, high pressure, high chemical and pH resistance. Nominal Retention: 1 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : N0611.0CM
Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and Fe2O3. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Grade No. 4A Hardened is further treated with nitric acid. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Ash Content: 0.01% (except Grade No. 4A is 0.025%). Grade No. 3 Medium retention, fast flow rate paper with good chemical resistance and wet strength. Recommended for analysis of soils, fertilizers, cement, and minerals. Nominal Retention: 5 µm. Grade No. 5A Retains coarse and gelatinous ppt with high flow rates. Filter hydroxides, metalic aerosols, environmetnal monitoring, and determine silica content in steel. Nominal Retention: 7 µm. Grade No. 5B Retains medium size ppt such as CaCo3, PbSO4, AgCl. General purpose paper. Nominal Retention: 4 µm. Grade No. 5C High retention efficiency collecting fine ppt such as BaSO4 with slow flow rate. Gravimetric analysis and collecting particles that tend toward colloidal dispersion. Nominal Retention: 1 µm. Grade No. 6 Retains medium-fine particulates. Use for precision analysis of trace and precious metals, beverages, water. Nominal Retention: 3 µm. Grade No. 7 Highest purity paper for medium particulates. Fast flow rate. Recommended for precise gravimetric analysis of minute trace and precious metals. Nominal Retention: 4 µm. Grade No. 4A Hardened, smooth low ash paper with superior wet strength. Retains fine crystalline ppt with slow flow rate. Suitable for Buchner filtrations, high pressure, high chemical and pH resistance. Nominal Retention: 1 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Ahlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to remove any remaining organic and inorganic impurities. All quantitative grades are manufactured in a strictly controlled environment that ensures high uniformity and high purity from filter to filter. Quantitative analysis Low ash content 0.007% (Acid-wash treated) High wet-strength Consistent performance Custom cut Bulk packaging Ashless Grades (Ash 0.007%) These standard ashless grades are high purity filter papers suitable for routine quantitative gravimetric techniques and in the preparation of samples for use in analysis involving instrumental techniques. Ahlstrom 74: 2.0µm – Medium Speed This grade has medium flow rate and good particle retention and is the most commonly used acidwashed filter. Ahlstrom 74 covers a wide range of general ashless filtration applications. It is used for gravimetric analysis of numerous components (e.g.: cements, copper, clay, bismuth, silicon, iron) found in heavy industries such as construction, mining or steel. Ahlstrom 74 is also used as a high purity filter for speedy filtering of trace elements such as silver chromate, lead sulfate, zinc and ammonium hydroxides. Ahlstrom 74 is also found in general soil analysis for separating solid from aqueous extracts. Grade: 74 Retention (µm): 2.0 Filtration Speed (Herzberg sec/100mls): 229 Filtration Speed Rapidity (mls/min): 30 Loading Capacity: Medium