Advantec MFS Inc.
Mfg Item # : N0218.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : N05B15.0CM
Advantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and Fe2O3. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Grade No. 4A Hardened is further treated with nitric acid. Following the acid wash, all papers are rinsed in ultrapure water to neutralize. Ash Content: 0.01% (except Grade No. 4A is 0.025%). Grade No. 3 Medium retention, fast flow rate paper with good chemical resistance and wet strength. Recommended for analysis of soils, fertilizers, cement, and minerals. Nominal Retention: 5 µm. Grade No. 5A Retains coarse and gelatinous ppt with high flow rates. Filter hydroxides, metalic aerosols, environmetnal monitoring, and determine silica content in steel. Nominal Retention: 7 µm. Grade No. 5B Retains medium size ppt such as CaCo3, PbSO4, AgCl. General purpose paper. Nominal Retention: 4 µm. Grade No. 5C High retention efficiency collecting fine ppt such as BaSO4 with slow flow rate. Gravimetric analysis and collecting particles that tend toward colloidal dispersion. Nominal Retention: 1 µm. Grade No. 6 Retains medium-fine particulates. Use for precision analysis of trace and precious metals, beverages, water. Nominal Retention: 3 µm. Grade No. 7 Highest purity paper for medium particulates. Fast flow rate. Recommended for precise gravimetric analysis of minute trace and precious metals. Nominal Retention: 4 µm. Grade No. 4A Hardened, smooth low ash paper with superior wet strength. Retains fine crystalline ppt with slow flow rate. Suitable for Buchner filtrations, high pressure, high chemical and pH resistance. Nominal Retention: 1 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Pack of 50

Advantec MFS Inc.
Mfg Item # : N023218.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Pack of 100

Advantec MFS Inc.
Mfg Item # : GA5555MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : GA5590MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Pack of 50