Search Results
FILTER SYG 25MM .2U NYL PK1500
Item #:
WHT/6871-2502
Supplier #: 6871-2502
Supplier #: 6871-2502
Cytiva - Whatman 6871-2502 Nylon GD/X Syringe Filter
0.2um pore size. 25mm diameter. Hydrophilic nylon filter for aqueous and organic-based samples. Two prefilters [graded density Multigrade GMF 150 (10:1um) and Grade GF/F (0.7um)] allow filtration of hard-to-filter samples with minimal hand force. For samples < 10ml. Exact Match 28138-192
0.2um pore size. 25mm diameter. Hydrophilic nylon filter for aqueous and organic-based samples. Two prefilters [graded density Multigrade GMF 150 (10:1um) and Grade GF/F (0.7um)] allow filtration of hard-to-filter samples with minimal hand force. For samples < 10ml. Exact Match 28138-192
Bottle WM HDPE Bulk 64oz cs/28
Item #:
DYN/301615-0064
Supplier #: 301615-0064
Supplier #: 301615-0064
BOTTLE HDPE BULK WM 2L CS28 Round Wide-Mouth HDPE Bottle with unattached PP screw closure. Leakproof translucent and resin complies with FDA requirements for food. Temp. range is -100 to 120C. Resistant to most common chemicals. 245x120mm HxOD . Neck ID is 54mm. Exact Match 30620-172
Hexane for HPLC, =98.5% CS/4X4L
Item #:
SIG/293253-4X4L
Supplier #: 293253-4X4L
Supplier #: 293253-4X4L
SIGMA-ALDRICH CORPORATION Part No. 293253-4X4L
For HPLC, ≥98.5% Synonym(s): Hexanes; Isohexane Empirical Formula: C6H14 Formula Weight: 86.18 Linear Formula: C6H14 MDL Number: MFCD02179311 Purity: ≥98.5% Boiling Point: 68-70 °C(lit.) Melting Point: −95 °C(lit.) Density: 0.672 g/mL at 25 °C(lit.) Refractive Index: n 20/D 1.379(lit.) Beilstein Registry Number: 1730733 RIDADR: UN 1208 3 / PGII
For HPLC, ≥98.5% Synonym(s): Hexanes; Isohexane Empirical Formula: C6H14 Formula Weight: 86.18 Linear Formula: C6H14 MDL Number: MFCD02179311 Purity: ≥98.5% Boiling Point: 68-70 °C(lit.) Melting Point: −95 °C(lit.) Density: 0.672 g/mL at 25 °C(lit.) Refractive Index: n 20/D 1.379(lit.) Beilstein Registry Number: 1730733 RIDADR: UN 1208 3 / PGII
Whirl-Pak® Write-On Bags - 4 oz. (118 ml) - Box of 500 - Yellow Tape
Item #:
NSC/B01062
Supplier #: B01062
Supplier #: B01062
"
Blended, Virgin Polyethylene Film: exceptional clarity, superior strength, sterilized after manufacturing, FDA approved for food contact.
- Convenient Write-On Strip: makes labeling quick and easy, clear sample identification, for organization & traceability.
- Puncture-Proof Closure Tabs: inner and outer tapes for longevity and stability, wire for easy opening, pouring, and closing.
- Post-Manufacturing Sterilization: increased sample integrity, perforated closure to maintain sterility. Opening Pull tabs: for easy opening, non-slip textured Tyvek.
- Continuous Perimeter Seal: maximum protection against leaks.
- Trusted, Puncture-Proof Closure Tabs: tape extends beyond wire to eliminate sharp ends and provide a sturdy grip, wire tabs hold the top open for easy access to add to or remove sample, worry-free, no-leak closure for sample integrity.
Bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen temperatures down to -346° F (-210° C) —careful handling is required after freezing. Capacity is measured when the bag is closed and tab is folded over three times. Volume and dimensions are approximate.
Dimensions:
- 4-oz. (118 ml), 3” W x 7¼” L (7.5 x 18.5 cm)
- Film Thickness: 2.25 mils (.057 mm).
- Box of 500.
Shelf Life from Sterilization date found on the Sterility Documentation: 5 years from Sterilized date found on your Sterility Confirmation
Nitric Acid, 50% v/v, ( 1+1) 2.5 L
Item #:
RIC/5350-5PT
Supplier #: 5350-5PT
Supplier #: 5350-5PT
Nitric Acid 50% V/V Aqueous Solution 1 1 Exact Match RC5350-5PT
Pipette Tip 1000-5000 uL
Item #:
TMS/7733T97
Supplier #: 7733T97
Supplier #: 7733T97
THERMO FISHER - MOLECULAR BIO
Mfg Item # : 9402030
Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid retention. Ribbed top ensures a leakproof seal.
Mfg Item # : 9402030
Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid retention. Ribbed top ensures a leakproof seal.
Transfer Pipet General Purpose 7.7mL
Item #:
GLB/138080-500
Supplier #: 138080-500
Supplier #: 138080-500
Globe Scientific, Inc.
Mfg Item # : 138080-500
Material: Low Density Polyethylene (LDPE) Packaging: Globe Scientific's non-sterile transfer pipets are packaged in a unique dispenser box. This convenient box is small and compact and ideal for bench-top use. The hinged front panel opens for quick access to the pipets and can be closed when not in use to keep the contents clean. Each dispenser box contains 500 pipets.
Mfg Item # : 138080-500
Material: Low Density Polyethylene (LDPE) Packaging: Globe Scientific's non-sterile transfer pipets are packaged in a unique dispenser box. This convenient box is small and compact and ideal for bench-top use. The hinged front panel opens for quick access to the pipets and can be closed when not in use to keep the contents clean. Each dispenser box contains 500 pipets.
Crimp Seal Aluminum 11mm Silver PK/100
Item #:
KBC/6ACC11RT1
Supplier #: 6ACC11RT1
Supplier #: 6ACC11RT1
Use Thermo Scientific™ SureSTART™ 11 mm Crimp Caps with crimp vials that have an 11 mm opening, including our SureSTART 2 mL Glass Crimp Vials (Level 2). Select Level 2 products for high-throughput applications, when robustness and reproducibility are key. Choose from aluminum caps with all-purpose silicone/PTFE septa of various hardness values designed to reduce autosampler needle issues. Use Thermo Scientific™ Manual or Electronic Crimpers and Decappers for easy application and removal of crimp caps.
Conical with PE Polyspring Glass PK/100
Item #:
KBC/6PME03C1SP
Supplier #: 6PME03C1SP
Supplier #: 6PME03C1SP
SureSTART™ Glass Inserts for 2 mL Vials, Level 3 High Performance Applications
SureSTART™ Glass Inserts for 2 mL Vials, Level 3 High Performance Applications
SureSTART™ Glass Inserts for 2 mL Vials, Level 3 High Performance Applications
SureSTART™ Glass Inserts for 2 mL Vials, Level 3 High Performance Applications
Thermo Scientific™
SureSTART™ Glass Inserts for 2 mL Vials, Level 3 High Performance Applications
Catalog number: 6PME03C1SP
Technical Support
Customer Service
Use Thermo Scientific™ SureSTART™ Performance Level 3 Inserts with 2 mL vials when analyzing <2 mL samples to maximize the injection volume. These glass inserts have a small total volume capacity of <400 µL, with a minimum residual volume of 2 µL. When placed and sealed inside a 2 mL vial, microsamples can be used in conventional autosampler trays. Choose from polyspring conical, pulled point conical, or flat bottom insert formats. Conical inserts are most effective with residual volumes of 2-4 µL. These inserts are Performance Level 3, which means they are designed to protect your most valuable samples and deliver consistent, reproducible results for your most demanding analyses. They are Specification Certified to ensure physical dimensions and meet all requirements of US, EU, JPN Pharmacopeia.
Water, ACS Reagent ASTM Type 1, 20 L
Item #:
RIC/9150-5
Supplier #: 9150-5
Supplier #: 9150-5
Products :: Water :: ACS/ASTM Reagent Water
RICCA CHEMICAL COMPANY offers ASTM, USP/EP, and Sterile quality water in a wide variety of sizes. Don't get stuck with the maintenance expenses, replacement costs, quality issues, and slow output of laboratory purification systems. Our top-of-the-line water and quality systems at multiple facilities means rapid manufacturing and delivery to anywhere in the United States. Put the simplicity back into water with RICCA CHEMICAL COMPANY.