Color
Tubing
SuppliesTubing
Viewing Page 11 of 17
(164 results)
Pharma-50 Tubing, Silicone0.250 x 0.438"
Item #:
VAN/63000-128
Supplier #: 63000-128
Supplier #: 63000-128
DDP SPECIALTY ELECTRONIC MATERIALS
Mfg Item # : 3100464
Dow Corning* Pharma-50 Tubing Marked for easy identification. Stable over a wide temperature range. Sterilize using ethylene oxide, autoclaving or gamma radiation. Meets or exceeds GMPs, USP Class VI and 3-A Sanitary Standard procedures. Coil length: 15.2M. 6.35IDx11.1ODmm. Wall length: 2.4mm.
Exact Match: 63000-128
Mfg Item # : 3100464
Dow Corning* Pharma-50 Tubing Marked for easy identification. Stable over a wide temperature range. Sterilize using ethylene oxide, autoclaving or gamma radiation. Meets or exceeds GMPs, USP Class VI and 3-A Sanitary Standard procedures. Coil length: 15.2M. 6.35IDx11.1ODmm. Wall length: 2.4mm.
Exact Match: 63000-128
Tubing ChemFLR PTFE pk/50'
Item #:
VAN/63014-900
Supplier #: 63014-900
Supplier #: 63014-900
Saint Gobain Performance Plastics TSPTFE012531
Chemfluor* Fluoropolymer Tubing Translucent PTFE resin. Fully-fluorinated with excellent chemical inertness. 1.58IDx3.17ODmm. Wall thickness: 0.79mm. Temperature range: -268 to 288[degree]C. Durometer hardness: Shore D, 58. Maximum pressure: 30bar at 23[degree]C. FDA compliant. Coil length: 15.2. Exact Match: 63014-900
Chemfluor* Fluoropolymer Tubing Translucent PTFE resin. Fully-fluorinated with excellent chemical inertness. 1.58IDx3.17ODmm. Wall thickness: 0.79mm. Temperature range: -268 to 288[degree]C. Durometer hardness: Shore D, 58. Maximum pressure: 30bar at 23[degree]C. FDA compliant. Coil length: 15.2. Exact Match: 63014-900
Tubing PTFE Tapered 12 ga 900mm
Item #:
TMS/0470U43
Supplier #: 0470U43
Supplier #: 0470U43
Hamilton Part No. 240360
The ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous liquids. Polytetrafluoroethylene (PTFE) tubing for ML500 valves with M6 threads Dispense tubing is used to connect from the valve to the hand probe Tapered at one end to minimize contamination from one sample to the next Tubes are precut to 900 mm for dispense tubing
The ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous liquids. Polytetrafluoroethylene (PTFE) tubing for ML500 valves with M6 threads Dispense tubing is used to connect from the valve to the hand probe Tapered at one end to minimize contamination from one sample to the next Tubes are precut to 900 mm for dispense tubing
Tubing Amber Latex 3/16 x 3/8" 3/32"
Item #:
TMS/9521S82
Supplier #: 9521S82
Supplier #: 9521S82
KENT ELASTOMER PRODUCTS
Mfg Item # : 606R
Smooth-walled, semi-transparent Pure, natural, rubber latex Made by dip process from virgin stock Strong and highly resilient Uniformly cured for superior resistance to aging and oxidation This non-toxic, autoclavable tubing has the flexibility and chemical-resistance characteristic of natural rubber. It is ideal for general laboratory applications as well as for clinical and biological uses. Meets Federal Specification ZZ-T-831C, Amendment 3, Types IV and V. 50-foot quantities of sizes 5/16” bore and smaller on reel, containing one or two lengths not shorter than 10 feet. Dimensions in listings are I.D. x O.D. x Wall Thickness.
Mfg Item # : 606R
Smooth-walled, semi-transparent Pure, natural, rubber latex Made by dip process from virgin stock Strong and highly resilient Uniformly cured for superior resistance to aging and oxidation This non-toxic, autoclavable tubing has the flexibility and chemical-resistance characteristic of natural rubber. It is ideal for general laboratory applications as well as for clinical and biological uses. Meets Federal Specification ZZ-T-831C, Amendment 3, Types IV and V. 50-foot quantities of sizes 5/16” bore and smaller on reel, containing one or two lengths not shorter than 10 feet. Dimensions in listings are I.D. x O.D. x Wall Thickness.
Tapered Dispense Tubing 12Ga 90cm
Item #:
VAN/72310-016
Supplier #: 72310-016
Supplier #: 72310-016
HAMILTON COMPANY
Mfg Item # : 240360
Tubing for Microlab* 500 Series Dispensers/Diluters Tapered dispense tubing. 12 gauge. For use with 25227-830 series dispensers/diluters.
Exact Match: 72310-016
Mfg Item # : 240360
Tubing for Microlab* 500 Series Dispensers/Diluters Tapered dispense tubing. 12 gauge. For use with 25227-830 series dispensers/diluters.
Exact Match: 72310-016
Tapered Dispense Tubing 18Ga 90cm
Item #:
VAN/72310-026
Supplier #: 72310-026
Supplier #: 72310-026
HAMILTON COMPANY
Mfg Item # : 240130
Tubing for Microlab* 500 Series Dispensers/Diluters Tapered dispense tubing. 18 gauge. For use with 25227-830 series dispensers/diluters.
Exact Match: 72310-026
Mfg Item # : 240130
Tubing for Microlab* 500 Series Dispensers/Diluters Tapered dispense tubing. 18 gauge. For use with 25227-830 series dispensers/diluters.
Exact Match: 72310-026
Tubing PVC Clear 1/4 x 3/8" 1/16"
Item #:
VAN/60985-528
Supplier #: 60985-528
Supplier #: 60985-528
VWR International 60985-528
VWR Signature* Clear PVC Tubing 6.35IDx9.52ODmm. Made from highest grade resins and plasticizers. Resists most chemicals. Meets FDA, USP Class VI and USDA Standards. Durometer hardness: Shore A, 55. Temperature range: -32 to 71[degree]C. Tensile strength: 113.76bar. 1.58mm thick. Length: 15.2m.
VWR Signature* Clear PVC Tubing 6.35IDx9.52ODmm. Made from highest grade resins and plasticizers. Resists most chemicals. Meets FDA, USP Class VI and USDA Standards. Durometer hardness: Shore A, 55. Temperature range: -32 to 71[degree]C. Tensile strength: 113.76bar. 1.58mm thick. Length: 15.2m.
Tubing Clear PVC 3/8 x 1/2 x 1/16"
Item #:
VAN/60985-540
Supplier #: 60985-540
Supplier #: 60985-540
VWR International 60985-540
VWR Signature* Clear PVC Tubing 9.52IDx12.7ODmm. Made from highest grade resins and plasticizers. Resists most chemicals. Meets FDA, USP Class VI and USDA Standards. Durometer hardness: Shore A, 55. Temperature range: -32 to 71[degree]C. Tensile strength: 113.76bar. 1.58mm thick. Length: 15.2m.
VWR Signature* Clear PVC Tubing 9.52IDx12.7ODmm. Made from highest grade resins and plasticizers. Resists most chemicals. Meets FDA, USP Class VI and USDA Standards. Durometer hardness: Shore A, 55. Temperature range: -32 to 71[degree]C. Tensile strength: 113.76bar. 1.58mm thick. Length: 15.2m.
