LABSTRONG CORPORATION Part No. A56220-857LS
FI-Streem III for general lab uses Four and eight liter/hour Glass components assure virtually no leaching of impurities into the distilled water Microprocessor controlled Easy to operate membrane-type touch pad control panel Patented vapor trap eliminates carry-over of vapor-borne water droplets which may contain impurities. Fully automatic, microprocessor controls simplify operation and cleaning, while also assuring high reliability. Automatic control activates still as required to maintain a full reservoir. Automatic drain cycle combats build-up of scale, reducing the frequency of clean-up required. Unique cleaning cycle provides simple and effective cleaning of the still. Flow of cooling water automatically maintained for tap and pretreated water. Thermistor and heat sensor provide double protection against low water operation. Low water cut-off is included. Stills are CSA approved; 240 V 50/60 Hz. 15 amps for 4 L, 30 amps for 8 L (can be converted to 208V in field). Can be wall or bench mounted. For use with tap or pretreated water. Dimensions: Model 3911T34 and 1221Z22 measure 11.5” x 15” x 29 1/2”; Models 3911T36, 3911T40, 1221Z23 and 1221Z24 measure 19.25” x 11.25” x 29.5”. Bi-distiller provides double distillation to increase water purity above 1 megohm-cm. Automatic start and stop feature works only when connected to a FI-Streem tank or with provided level monitor.