Cytiva - Whatman 10414112 Polyamide Membrane 47mm
Polyamide Membrane, Type: Circle (NL17), pore size: 0.45 um,Diameter: 47mm, Water Flowrate: 20 ml/min/cm2, Maximum Operating Temperature: 135 deg C, suitable for aqueous and organic solutions, mechanically very strong and exhibit excellent wet strength and dry strength Exact Match 28152-899

GVS Filter Technology Part No. 1215540
Extend the life of final filters Pore sizes from 0.5 µm to 1.0 µm With or without binders Autoclavable PreSep prefilters are biologically inert and highly resistant to oxidizing agents and weak acids. Primarily used to extend the life of a final filter, they can also be used as a low-cost sample clarifier. Prefilters increase the speed of filtration by trapping large particles before they reach the final membrane filter. Frequency and cost of replacing the final membrane filters is reduced. Filters with binders are composed of borosilicate glass fibers woven into a porous matrix and bonded by an acrylic resin. The resulting filter reduces media migration and has the strength required for high-volume aqueous filtrations. Maximum operating temperature is 165°C (325°F). Glass prefilters without binders are designed to avoid binder extractables during solvent filtration or gravimetric analysis. Not recommended for temperatures exceeding 510°C (950°F). For upstream protection of a membrane within a filter holder, the use of a prefilter that is slightly smaller in diameter than the main filter allows the prefilter to fit inside the O-ring or filter funnel holder seal, ensuring a positive membrane seal. When used as the main filter medium, select a diameter of the same size as the filter holder to be used. Type G15 Glass Fiber Prefilters with Binders (4749A02 to A14) Nominal pore size- 0.5 µm High rentention efficiency Limited dirt-handling capacity Protection of 0.2 µm to 0.8 µm final filters Type G20 Glass Fiber Prefilters with Binders (4749A20 to A32) Nominal pore size- 1.0 µm Surface capture of particles Average retention efficiency Higher dirt-handling capacity Protection of 0.8 µm and larger pore size final filters Type G25 Glass Fiber Prefilters with Binders (4749A40 to A54) Nominal pore size- 1.0 µm Thickness approximately 3.5 times greater than G20 Depth particle capture Average retention efficiency Highest dirt-handling capacity Recommended for solutions with heavy contaminate loads Protection of 0.8 µm and larger pore size final filters Type G40 Glass Fiber Prefilters WITHOUT Binders (4638D60 to D68) Nominal pore size- 1.0 µm Average retention efficiency Highest dirt-handling capacity Recommended for solvent filtration, gravimetric analysis, contamination analysis of wastewater and industrial effluents TCLP Glass Fiber Filters WITHOUT Binders, 0.7 µm Pore Size (4749A72) Borosilicate glass fiber filters designed for use in U.S. EPA Method 1311 Toxicity Characteristic Leaching Procedure (TCLP). Federal regulations require the filters for this application be made of borosilicate glass fiber, contain no binder materials and have an effective pore size of 0.6 to 0.8 microns. GE TCLP glass fiber filters have a pore size of 0.7 microns and are binder free. They are used in Zero-Headspace Extractor Vessels for determining the mobility of semi-volatiles. Filters should be acid washed prior to use with 1N nitric acid followed by three consecutive rinses with deionized water. A minimum of 1 liter per rinse is recommended.

Cytiva - Whatman 111137 Nuclepore* Polycarbonate AOX Track-Etched Membranes, Circles, 12.0 uM, 47 mm 100/pk
Manufactured from high-quality polycarbonate film and have sharply defined pore sizes, high flow rates, and excellent chemical and thermal resistance. Exact Match 10034-592

White Gridded, EZ-Pak mixed cellulose ester membrane cartridges. 0.45µm pore size, 47 mm filter diameter, white filter colour. 4 bands of 150 filters/pk.

Cytiva - Whatman 7182-004 Cellulose Nitrate Membrane Filter, Type WCN
0.2um pore size. 47mm diameter. White. For most routine applications involving particles and cells from 0.1-5.0um. Flexible membranes tolerate abuse during handling, loading, and autoclaving without sacrificing integrity. Low levels of extractables. Exact Match 28159-570

Global Life Sciences Solutions USA LLC
Mfg Item # : 7188-004
Produced from high-purity nitrocellulose Resistant to mild acids, hydrocarbons, formaldehyde, aniline, isopropyl and petroleum ethers, oils, gasoline and kerosene Attacked by strong acids, bases, ethyl amines, ketones and esters Smooth-surfaced and flexible 0.2 µm pore size filters are 130 µm thick; other pore sizes to 150 µm thick Autoclavable, usable at temperatures to 130°C Can be made transparent by immersion in clear liquid of refractive index 1.5 Ash content 0.002 - 0.005 mg/cm 2 Levels of extractables, approximately 2% Flow rates given in the table below are initial flow rates, measured at 10 psi (69 kPa) differential pressure. White, Plain, Non-Sterile (4665M05 to M52) Suitable for gravimetric and clarification techniques using aqueous solutions In clear, plastic boxes containing two plastic dispensers of 50 filters each Filters are interleaved with paper separators Each dispenser is labeled with pore size and filter diameter and has clear, plastic slip-on lid. White, Gridded, Sterile (4665M70 and 1231E77) With non-toxic, black grid in 3.1 mm squares Individually wrapped with absorbent pad in sealed, polyester envelope Sterilized using ethylene oxide

Black Filter Paper Circles 100 Circles/PK. 100PK/CS. 4.70cm diameter circles. Smooth Black Finish Visual Test Filter Paper. Weight 85g/m2 Thickness 0.18mm Herzberg 114sec/100ml Rapidity 60ml/min Capillary Rise 22mm Retention 4um 100% wood fiber. Exact Match 28342-020

Pall Laboratory
Mfg Item # : 60110
Supor* Membrane Disc Filter 0.8um pore size. 47mm diameter. Plain, nonsterile. Supor hydrophilic polyethersulfone membrane for high flow rate, low protein binding, low extractables. Stronger than acetate and nitrate membranes. Very high water flow, fluid filtration capacity. Autoclavable. 100/pk.
Exact Match: 28147-468

Binder-free, borosilicate glass fiber filters have 0.7 micron pore size · 47mm size recommended for use with 09-753-1A Filter Holder in filtering highly granular samples or those with <10% solids · 90mm size recommended for use with 09-753-2.