TROEMNER Part No. 1310W
Primarily used to test commercial weighing devices by state and local weights and measures officials, device installers and service technicians. Class F weights may be used to test most accuracy Class III scales, all scales of Class IIIL or IIII, and scales not marked with a class designation. NVLAP Accredited Certificate Troemner's NVLAP Accredited Certificate provides compliance in both measurement process and data reported to the customer to meet a variety of standards including NVLAP Handbook 150-2, ISO/IEC 9000, ISO/IEC 17025, FDA, GMP. GLP, DOD, ANSI/NCSL Z540-1 and nuclear requirements. Troemner's NVLAP Laboratory Code is 105013-0. The NIST administered National Voluntary Laboratory Accreditation Program (NVLAP) approves, through periodic audits, all processing and weighing procedures, as well as certificate format and content. Calibration procedures vary by tolerance class requested. For example, for higher accuracy classes such as Troemner UltraClass Series, ANSI/ASTM E617 Class 000, 00, 0 and 1, OIML R 111 Class E0, E1, E2 and F1, Troemner performs a multiple weighing procedure utilizing standards to determine the mass of a customer's weight.

Holder; Troemner; Talboys; Heavy Duty; For Labjaws clamp of aluminum alloy; Grip size: 0.24 to 0.94 in.(6 to 24mm); For mounting stirrers; Rods supported on 4 in. (12cm) long surface; 1/EA Exact Match 2216354

UltraClass weights 1g to 20kg are made from Troemner Alloy 8, which is a specially austenitic stainless steel that possesses closely controlled density, extremely low magnetic permeability, good stability and resistance corrosion and handling damage. This exclusive material has a density of 8.0 at 25ºC (controlled to ±0.1%), is essentially nonmagnetic in the annealed condition, and will not transform to magnetic under any combination of temperature and cold work down to –195.5ºC (–320ºF). Class 1 and 4 weights 1g to 1kg are made from Troemner Blended Stainless Steel. Weights 2kg to 50kg are made from Type 316 stainless steel.

TROEMNER LLC 7250-00W
2g-1mg ASTM Cal-Pak Class 0 with NVLAP Certificate containing one each 2g, 200mg and 1mg weights. Exact Match: 97007-962

Clamp, Extension; Labjaws; Two-Prong; Single adjustment; Grasps all types of lab glassware and apparatus; Round ext. handles; Can be rotated 360 deg.; Max. Grip Size: 78mm (3.07 in.); Length: 216mm (8.5 in.); Prong Width: 23mm (0.91 in.); 1/EA Exact Match 2300206

Rings, Open; Troemner; Talboys; Labjaws; Aluminium; Open ring dia.: 4 in. (102mm); Arm length: 2.28 in. (58mm); Arm diameter: 0.35 in. (9mm); Overall length: 6.22 in. (158mm); External arm length: 12 in. (305mm); 1/EA Exact Match 2300239

Support Stand; Troemner; for Double Buret Clamp (916367); Stainless steel; Rod Dia. x L: 13 x 578mm (0.51 x 22.76 in.); Base dimensions 178 x 330 x 25mm (7 x 13 x 1 in.); 1/EA Exact Match 2217134

Stand, Support; Troemner; Talboys; Labjaws; 303 Stainless-steel; w/Threaded SS support rod; U shaped base; Maximum vessel size: 18 in. (457mm); Base D: 17.75 x 10.5 in. (451 x 267mm); Rod L: 28 in. (711mm); Rod dia.: 0.63 in. (16mm); 1/EA Exact Match 2216340

Clamp, Support; Troemner; Talboys; Labjaws; Standard; Stainless steel; XL grip knobs; Accommodates o.5 in. dia. shaft of T-Line motor support rod, 0.62 in. dia. stand support rod; 1/EA Exact Match 2216352

Rings, Open; Troemner; Aluminum; Mounts items to lab frames; Open ring reduces risk of breakage; Ring Dia.: 3 in. (76mm); Arm L: 2.28 in. (58mm) Arm Dia.: 0.35 in. (9mm); L: 5.2 in. (132mm); 1/EA Exact Match 2300238