Balance, Analytical; Sartorius; Entris; Model:ENTRIS64-1S; External Calibration; Linearity: 0.2mg; Repeatability: 0.1mg; Readability: 0.1mg; Capacity: 60g; 1/EA Exact Match 14557448

SARTORIUS CORPORATION Part No. YCC01-USBM2
Cubis Data Printer Model YDP 10-0CE is a data printer designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm). Text and data are printed with up to 24 characters per line. The data printer meets the quality standards for research in the chemical and pharmaceutical industries, in compliance with the requirements of GLP (Good Laboratory Practice) and GMP (Good Manufacturing Practice). The printer can be used for output of weighing data. Data is sent to the output port either automatically or at the press of a key. The printer can be used as auxiliary equipment with a weighing instrument that has been verified for use in legal metrology. Data Printer with Stats The YDP20-0CE data printer is designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm), with up to 24 characters per line. The data printer is equipped with a real-time clock. After the printer has been configured according to the required settings, it is suitable for use as auxiliary apparatus in legal metrology. Density Determination Kit With this Sartorius Density Determination Kit you have acquired a high-quality accessory to your electronic balance. This accessory kit will ease your daily workload. Please refer to the Additional Info tab for more product information regarding these accessories.

SARTORIUS CORPORATION Part No. YHS01MS
Cubis Data Printer Model YDP 10-0CE is a data printer designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm). Text and data are printed with up to 24 characters per line. The data printer meets the quality standards for research in the chemical and pharmaceutical industries, in compliance with the requirements of GLP (Good Laboratory Practice) and GMP (Good Manufacturing Practice). The printer can be used for output of weighing data. Data is sent to the output port either automatically or at the press of a key. The printer can be used as auxiliary equipment with a weighing instrument that has been verified for use in legal metrology. Data Printer with Stats The YDP20-0CE data printer is designed to receive weighing data from a connected weighing instrument and print it on plain paper (roll width: 57.5 mm), with up to 24 characters per line. The data printer is equipped with a real-time clock. After the printer has been configured according to the required settings, it is suitable for use as auxiliary apparatus in legal metrology. Density Determination Kit With this Sartorius Density Determination Kit you have acquired a high-quality accessory to your electronic balance. This accessory kit will ease your daily workload. Please refer to the Additional Info tab for more product information regarding these accessories.

SARTORIUS CORPORATION Part No. 14143----------A
Nutrient pads are sterile pads impregnated with dehydrated culture media. Once they are moistened with 3.0–3.5 ml of sterile water they are ready to use immediately. Nutrient Pads reduce labor and simplify many microbiological testing procedures. May be safely stored at room temperature for up to 24 months.

SARTORIUS CORPORATION Part No. YDS01SQP
The YDS01SQP draft shield can be installed on the following weighing instruments: Secura, Quintix or Practum balances with a readability of 10 mg, 0.1 g or 1 g

Mark 3 HP Moisture Analyzer with printer, consisting of:• LMA100PA-000U control module incl. printer • LMA100PQ-000U heater module (0.1 mg, 100 g)

Display Results - 0.01%. Mark 3 LTE MoistureAnalyzer with printer, consisting of – LMA100PA control module incl. printer – LMA110SQ heater module (1 mg, 40 g)