Fiberglass Blower for moderate-highly corrosive fume hood applications. Features explosion-proof UL-listed motor fiberglass reinforced polyester housing polypropylene impeller epoxy-coated base weather cover adjustable sheave flow-through vent holes louvers allow gravity belt tightener Exact Match 82006-812

Blower, Fiberglass; Labconco; 12.38 in. outer dia. inlet; 12.75 in. inner dia. outlet; 1.5hp motor; 1303-1639rpm range; Between 1000 and 2000 CFM; 115/230V 60Hz; 1/EA Exact Match 1609050

Labconco 7181810
Blower Intelli-Sense Multi-Speed Fiberglass Blower, 115v, Motor Type: Energy Efficient Direct Drive ECM MotorCFM: Between 1000 and 2000, Less than 1000, Hood Application: Low to moderately corrosive, HP: 1, 10.38 inch inner diameter, 10.75 inch outer diameter. Exact Match: 10127-928

LABCONCO CORPORATION Part No. 7181812
Ideal for fume hood exhaust systems in moderate to highly corrosive conditions. Intelli-Sense Multi-Speed Blowers are weatherized, direct drive, non-explosion-proof blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less energy and is easier and less expensive to maintain than beltdrive motors. Intelli-Sense Blowers take much of the guesswork out of blower selection. Since they are adjustable over a broad airflow range, they may be used to exhaust fume hoods from 3' to 7' in width at full sash open height and 100 fpm face velocity. The blowers may also be used with hoods from 8' to 16' in width with reduced air volume modifications. As needs change, the blower settings may be adjusted to accommodate new airflow requirements. Features & Benefits Housings are made from molded fiberglass reinforced polyester for durability and long life Balanced, forward-curved impellers made of injection-molded polypropylene resist corrosive atmospheres, operate quietly and provide optimum air delivery Powder-coated base and weather cover provide long life in extreme weather Direct drive, UL listed, ECM motor uses one third less energy than belt drive motors Inlet and discharge diameters are sized to receive rigid PVC ducting material directly for easy installation Thermal override protection. RPM speeds are automatically reduced when motor is overloaded Flow-through vent holes and louvers allow air to circulate Speed control box included for mounting on top of customer-supplied fume hood and blower switch and label* for multiple speed operation When blower is properly installed to ductwork, sound levels range from 50 to 70 dba Variable exhaust orientation adjusts to eight outlet positions for installation flexibility (vertical discharge is recommended) Models without control boxes are for use with Protector I-S Hoods ONLY. All other hoods require the blower with the control box.

Labconco 7182000
Fiberglass Blower for moderate to highly corrosive fume hood applications. Features: molded fiberglass reinforced polyester housing, polypropylene impeller, epoxy-coated base & weather cover, adjustable sheave, flow-through vent holes & louvers allow, self-adjusting gravity belt tightener Exact Match: 82006-794

Labconco 7182300
Fiberglass Blower for moderate-highly corrosive fume hood applications. Features:explosion-proof UL-listed motor, fiberglass reinforced polyester housing, polypropylene impeller, epoxy-coated base & weather cover, adjustable sheave, flow-through vent holes & louvers allow, gravity belt tightener Exact Match: 82006-818

Blower, PVC; Labconco; 1hp; Inlet/Outlet: 12.38 in. OD Inlet, 12.75 in. ID Outlet; Made specifically to handle extremely corrosive atmospheres produced; 230V; 1/EA Exact Match 1609010 82006-824

8-Port Manifold for use with 1L, 2.5L, 4.5L, 8L, 6L, 12L or 18L FreeZone Freeze Dryer. Type 304 Stainless Steel complete with 8 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flask.

Labconco 7318702
Short Chamber 34.5 x 42.7 cm Short Chamber, Color: Clear, Material: Acrylic, Diameter: 12in, Fits all FreeZone Freeze Dryers, Includes lid with gasket, vacuum release valve and pass through for electrical cords, Diameter opening: 8in, To collector on bottom of chamber, Dimension: 34.5 x 42.7 cm Exact Match: 75841-010

Slant Freeze Flask Holder accommodates flasks of any size. Manually adjust angle from 5° to 35°. Made of powder-coated steel. Excellent for pre-freezing flasks for greater surface area.