Search Results
10L Rotary Evaporator w/ Motorized Lift
Item #:
ACI/SE26
Supplier #: SE26
Supplier #: SE26
Across International Ai SolventVap 2.6-Gallon/10L Rotary Evaporator w/ Motorized Lift
20L Rotary Evaporator w/ Motorized Lift
Item #:
ACI/SE53
Supplier #: SE53
Supplier #: SE53
Across International Ai SolventVap 5.3-Gallon/20L Rotary Evaporator w/ Motorized Lift
Ai 5 Liter Glass Separatory Funnel Kit
Item #:
ACI/SFUNNEL-5L
Supplier #: SFunnel-5L
Supplier #: SFunnel-5L
Across International Ai 5 Liter Glass Separatory Funnel Kit with All PTFE Valves
Flask 2-Neck 2L Heavy Wall Round Bottom
Item #:
ACI/SP-2L2NS
Supplier #: SP-2L2NS
Supplier #: SP-2L2NS
24/40 standard taper joints, one vertical neck, one angled neck, borosilicate glass 3.3.
Dual-Stage Sliding Vacuum Pump 115V
Item #:
ACI/SV11C-UL.115
Supplier #: SV11C-UL.115
Supplier #: SV11C-UL.115
The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL/CSA certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.
Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.
It is important to note that pumps should always be ran in a well ventilated area.
Free high capacity exhaust oil mist filter ($250 value), KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.
Features
UL 61010-1 and CSA C22.2 certified (115V model)
45% more powerful 1,100W motor vs 750W in the previous version
Corrosion-resistant design for durable operation in various environment
Adjustable gas ballast
Built-in oil back-flow prevention check valve
Internal forced oil cycling system
Integrated cylinder structure
Exhaust filter with easy-to-change replaceable filter element
Heavy duty structure and designed for reliable long time operation
Low noise
All necessary fittings and filter included for immediate use
2-year warranty
Specifications
Electrical Requirements: 115V 60Hz or 230V 50/60Hz, single phase, 1,100 watts
Pumping Rate: 11.3 cfm (115V 60Hz), 9.3 cfm (230V 50/60Hz)
Ultimate vacuum without gas ballast:
0.3 micron/millitorr
Ultimate vacuum with gas ballast:
6 micron/millitorr
Inlet/outlet Connection: KF25/NW25 flange
Oil Volume: 1.5 liter / 1.59 quart
Motor Rate: 1715 rpm (at 60Hz) or 1440 rpm (at 50Hz)
Working temperature: 5 to 40°C
Recommended Oil: Ultra-grade 19
Noise Level: < 58 dB
Chiller Ai T1 Glass Vacuum Cold Trap
Item #:
ACI/T1
Supplier #: T1
Supplier #: T1
Across International Ai T1 Glass Vacuum Cold Trap for Safe Vacuum Operations
Glass Vacuum Cold Trap w/ 24/40 Joints
Item #:
ACI/T1-2440
Supplier #: T1-2440
Supplier #: T1-2440
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the vacuum cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
T1-2440 features:
Utilizes dry ice for optimal efficiency
Comes with scissor jack for easy collection flask removal
Easy to clean all glass construction
Small footprint
Setup in a few minutes
PTFE 24/40 to KF25 adapter NOT included
Specifications
Model: T1-2440
Vacuum Inlet/Outlet: 24/40 joint Collection Flask Capaclity: One liter
Setup Dimensions (WxDxH): 6 x 11 x 28"