Search Filters
-
Chemglass Life Sciences x
Filter Your Search
Category Group
Browse Categories
Loading...
Search Results
Pipette Controller Manual Green
Item #:
CGL/CLS-3470-10
Supplier #: CLS-3470-10
Supplier #: CLS-3470-10
Pipette Controller Manual Green Exact Match 89167-162
Atomizer Top Only 250ml
Item #:
CGL/CG-1180-08
Supplier #: CG-1180-08
Supplier #: CG-1180-08
CHEMGLASS LIFE SCIENCES, LLC Part No. CG-1180-08
Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the user’s thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an atomizer top attached to the reservoir with a Rodaviss® 24/40 joint. This design provides for a positive, grease-free seal between the atomizer and reservoir and eliminates the glass hooks used on other sprayers.
Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the user’s thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an atomizer top attached to the reservoir with a Rodaviss® 24/40 joint. This design provides for a positive, grease-free seal between the atomizer and reservoir and eliminates the glass hooks used on other sprayers.
Buchner Filter Funnel, Med Frit, 30mL
Item #:
CGL/CG-1402-11
Supplier #: CG-1402-11
Supplier #: CG-1402-11
CHEMGLASS LIFE SCIENCES, LLC Part No. CG-1402-11
Funnel has a sealed-in glass fritted disc of the listed porosity. Useful wherever filter paper or membranes cannot withstand the chemical attack of the filtrate. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength. Not recommended for use where pressure would exceed 15 psi.
Funnel has a sealed-in glass fritted disc of the listed porosity. Useful wherever filter paper or membranes cannot withstand the chemical attack of the filtrate. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength. Not recommended for use where pressure would exceed 15 psi.
Filtering Tube 20mm C
Item #:
CGL/CG-1409-02
Supplier #: CG-1409-02
Supplier #: CG-1409-02
FILTERING TUBE REDUCED ENDS 20. Disc Diameter 20 Exact Match 80068-568
Filter Flask, 4L, 40/35, Plastic Coated
Item #:
CGL/CG-1424-05
Supplier #: CG-1424-05
Supplier #: CG-1424-05
Chemglass Life Sciences
Mfg Item # : CG-1424-05
Glassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.
Exact Match: 80068-686
Mfg Item # : CG-1424-05
Glassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.
Exact Match: 80068-686
Cap Only, Filtering Flask, 40/35
Item #:
CGL/CG-1424-06
Supplier #: CG-1424-06
Supplier #: CG-1424-06
Chemglass Life Sciences
Mfg Item # : CG-1424-06
Glassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.
Exact Match: 80068-688
Mfg Item # : CG-1424-06
Glassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc and a vacuum connection located above the drip tip to prevent filtrate from entering the vacuum line. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and plastic coated filtering flask.
Exact Match: 80068-688
