LABSTRONG CORPORATION Part No. D0835LS
LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure Quad water purification systems. The water purification cartridge provides outstanding quality you expect from your water system at a low cost. The cartridge is an economical alternative for all laboratories. The cartridge life capacity is indicated by resin color change. The water purification cartridge provides outstanding quality you expect from your water system at a low cost. The cartridge is an economical alternative for all laboratories and is ideal for small volume applications. LabStrong takes extra care in sealing our water purification cartridges multiple ways, ensuring exceptional quality is maintained throughout the two year shelf life. Each cartridge has fitted sealing plugs/caps placed on both ends and then it is further sealed in a bag – the combination of which dramatically inhibits drying out of the resin. *Barnstead and Thermo Scientific are trademarks of Thermo Fisher Scientific. LabStrong cartridge products are not affiliated with, nor supplied or sponsored by Thermo Fisher Scientific.  

LABSTRONG CORPORATION Part No. GSX28LS
The LabStrong GSX28LS Canister O-Ring is comparable to the Thermo Scientific™ Barnstead™ GSX28. The economical and reliable o-ring is designed for use in the Thermo Scientific Barnstead B-Pure™, E-Pure™ and NANOpure™ Quad Style water purification system cartridge canister housings. The inexpensive canister o-ring provides outstanding quality at a significantly lower cost than the competitor’s. The LabStrong Canister O-Ring is designed to seal the space between the cartridge canister housing and the head section of the water purification system. The o-ring is designed to prevent leakage between these two connections. Overtime, the o-rings in the Thermo Scientific Barnstead B-Pure, E-Pure and NANOpure Quad Style water purification systems wear and eventually fail. When the LabStrong Canister O-Ring fails the water purification systems can leak water. To prevent this from occurring, LabStrong recommends changing the o-rings when the cartridges in these water purification systems are replaced. When replacing the o-ring, place the o-ring in the recess located between the cartridge canister housing and the head section of the water purification system.  - Made in USA of USA and Imported Parts -  *Barnstead, B-Pure, E-Pure, Thermo Scientific and NANOpure are trademarks of Thermo Fisher Scientific. LabStrong Corporation’s replacement canister o-ring is not affiliated with, nor supplied or manufactured by Thermo Fisher Scientific.

All LabStrong™ Fi-Streem™ stills include the following items FREE so your ordering and installation will be simple and easy. • Reinforced mains input tube with fittings (TU744X1LS) • Distillate tube (TU0012-13) • Distillate glass elbow (562X4LS) • Reservoir float level switch (857X3LS) • Plastic funnel for cleaning (MC0012-2) • Wall mounting bracket (562X32LS) • Kit to convert still to pre-treated feed FEATURES • Consistently Pure ASTM Type II Water, of up to 1.4 liters per hour through distillation. • Hook directly to tap or to a pretreat source to maximize performance. • Space saving design – choose to mount to the wall or place on the bench. • Patented vapor trap to eliminate all vapor borne droplets for pyrogen free water. • Glass components to eliminate leaching of impurities. • Optimal power design with fewer watts and built-in flow controller to maximize product water output while minimizing inlet water usage to drain. • Simple to operate with the press of a button. • Simplified cleaning that doesn’t require the dismantling of any glassware and requires the press of two buttons • Dual flush program so the still can return to normal operation after a clean cycle. • Multiple safety features to protect the user and the still.

Description The Rapids™ was designed to provide an economical solution for analytical laboratories that need ASTM Type I water of resistivity up to 18.0 meg ?/cm This water kit is ideal to use with tap water or pretreated water depending on your laboratory needs. FEATURES Fully customizable for your laboratory needs Easy installation requiring no electricity Small footprint This cartridge kit is compatible with the Rapids™ Type I Water Purification System. This cartridge kit consists of one D00331 (Pretreat Colloid/Organic Removal) and three D00332 (Mixed Bed High Purity).

LABSTRONG CORPORATION Part No. D5028LS
LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure Quad water purification systems. The water purification cartridge provides outstanding quality you expect from your water system at a low cost. The cartridge is an economical alternative for all laboratories.

Includes O-Rings

LABSTRONG CORPORATION Part No. A56220-857LS
FI-Streem III for general lab uses Four and eight liter/hour Glass components assure virtually no leaching of impurities into the distilled water Microprocessor controlled Easy to operate membrane-type touch pad control panel Patented vapor trap eliminates carry-over of vapor-borne water droplets which may contain impurities. Fully automatic, microprocessor controls simplify operation and cleaning, while also assuring high reliability. Automatic control activates still as required to maintain a full reservoir. Automatic drain cycle combats build-up of scale, reducing the frequency of clean-up required. Unique cleaning cycle provides simple and effective cleaning of the still. Flow of cooling water automatically maintained for tap and pretreated water. Thermistor and heat sensor provide double protection against low water operation. Low water cut-off is included. Stills are CSA approved; 240 V 50/60 Hz. 15 amps for 4 L, 30 amps for 8 L (can be converted to 208V in field). Can be wall or bench mounted. For use with tap or pretreated water. Dimensions: Model 3911T34 and 1221Z22 measure 11.5” x 15” x 29 1/2”; Models 3911T36, 3911T40, 1221Z23 and 1221Z24 measure 19.25” x 11.25” x 29.5”. Bi-distiller provides double distillation to increase water purity above 1 megohm-cm. Automatic start and stop feature works only when connected to a FI-Streem tank or with provided level monitor.

Description The Rapids™ was designed to provide an economical solution for analytical laboratories that need ASTM Type I water of resistivity up to 18.0 meg ?/cm This water kit is ideal to use with pretreated water depending on your laboratory needs. FEATURES Fully customizable for your laboratory needs Easy installation requiring no electricity Small footprint This cartridge kit is compatible with the Rapids™ Type I Water Purification System. This cartridge kit consists of one D00335 (Pretreat Type I), two D00332 (Mixed Bed High Purity) and one D00333 (Organic Removal).

Description The Rapids™ was designed to provide an economical solution for analytical laboratories that need ASTM Type I water of resistivity up to 18.0 meg ?/cm This water kit is ideal to use with tap water or pretreated water depending on your laboratory needs. FEATURES Fully customizable for your laboratory needs Easy installation requiring no electricity Small footprint This cartridge kit is compatible with the Rapids™ Type I Water Purification System. This cartridge kit consists of one D00335 (Pretreat Type I), and three D00332 (Mixed Bed High Purity). Need additional assistance installing the cartridge? Contact our Technical Service Team: Email: technicalservice@labstrong.com Phone: 563-588-8900 Helpful videos can also be found on our YouTube Channel and custom playlists – https://www.youtube.com/user/LabStrong – Made in USA with Global Materials – Please Note: Cartridge Kit not included with the Rapids™ Type I Water Purification System.

LABSTRONG CORPORATION Part No. D5021LS
LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure Quad water purification systems. The water purification cartridge provides outstanding quality you expect from your water system at a low cost. The cartridge is an economical alternative for all laboratories. The cartridge life capacity is indicated by resin color change. The water purification cartridge provides outstanding quality you expect from your water system at a low cost. The cartridge is an economical alternative for all laboratories and is ideal for small volume applications. LabStrong takes extra care in sealing our water purification cartridges multiple ways, ensuring exceptional quality is maintained throughout the two year shelf life. Each cartridge has fitted sealing plugs/caps placed on both ends and then it is further sealed in a bag – the combination of which dramatically inhibits drying out of the resin. *Barnstead and Thermo Scientific are trademarks of Thermo Fisher Scientific. LabStrong cartridge products are not affiliated with, nor supplied or sponsored by Thermo Fisher Scientific.