Search Filters
-
Eberbach Corporation x
Filter Your Search
Category Group
Browse Categories
Loading...
Search Results
Blade Assembly Waring Standard Size
Item #:
EBB/E8670
Supplier #: E8670
Supplier #: E8670
Eberbach Corporation
Mfg Item # : E8670
1224E43: As supplied with blending containers #8440, 8442, 8490, 8500, 8510 and 8520.- Assembly has S/S blades- Blade diameter is 2-3/8". Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E44: All Stainless Steel, Standard Size Blending Assembly, Order No. 8672. Like 8670, but ALL stainless steel blades, bearing holder, shaft, bearing cap and cap nut. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E45: All Stainless Steel, Small Size Blending Assembly, Order No. 8712. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E46: All Stainless Steel, Semi micro Blending Assembly, Order No. 8732. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E47: Waring® 4-Liter Blending Assembly, Order No. 8660. Less washer and lock nut; for #8020 Waring 4-Liter container. Suitable for aqueous blending applications 1224E48: Harsh Condition 4- Liter Blending Assembly, Order No. 8661. Less washer and lock nut. Suitable when using liquids that would otherwise attack the nitrile seals of the standard 4-liter assemblies
Mfg Item # : E8670
1224E43: As supplied with blending containers #8440, 8442, 8490, 8500, 8510 and 8520.- Assembly has S/S blades- Blade diameter is 2-3/8". Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E44: All Stainless Steel, Standard Size Blending Assembly, Order No. 8672. Like 8670, but ALL stainless steel blades, bearing holder, shaft, bearing cap and cap nut. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E45: All Stainless Steel, Small Size Blending Assembly, Order No. 8712. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E46: All Stainless Steel, Semi micro Blending Assembly, Order No. 8732. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E47: Waring® 4-Liter Blending Assembly, Order No. 8660. Less washer and lock nut; for #8020 Waring 4-Liter container. Suitable for aqueous blending applications 1224E48: Harsh Condition 4- Liter Blending Assembly, Order No. 8661. Less washer and lock nut. Suitable when using liquids that would otherwise attack the nitrile seals of the standard 4-liter assemblies
Stainless Steel Waring Container 1L
Item #:
EBB/8520
Supplier #: E8520
Supplier #: E8520
1-Liter Stainless Steel Container for Waring Blenders 1L container assembly with stainless steel screw cover for sealing in contents and 15.9mm threaded sampling plug for removal or addition of material. Fits all Waring power units. Complete with O-ring gaskets for screw cover and sampling plug. Exact Match 58984-030
Heavy-Duty Shaker 115V 60Hz
Item #:
EBB/E6010.00
Supplier #: E6010.00
Supplier #: E6010.00
Electric split phase motor, which drives the platform through a V-belt drive system. Speed for the E6010 shaker is fixed. Model E6010 is a two-speed unit, operating at either 180 or 280 osc/minute (+/- 5%) and controlled by a three position switch. A built in digital countdown timer is available as an option. The E6010 has a horizontal stroke fixed at 1-1/2”, and a maximum load capacity of 40 lbs. Numerous accessories including flask holders, utility box carriers and tiered platform systems (for doubling shaking capacity), are available separately.
Utility Box Carrier 18x12x4"
Item #:
EBB/E6040
Supplier #: E6040
Supplier #: E6040
EBERBACH CORPORATION Part No. E6040
Holds various size and shape containers including test tube supports Slots in the four sides accommodate both cross-wise and length-wise bar clamps Aluminum box measures 18 x 12 x 4 inches high, with rubber-covered floor. Rubber-covered clamps may be secured anywhere in the slots by wing nuts. Utility of box can be increased by the addition of one or more vertical rods with supports in the corners of the box to which a variety of containers can be clamped. Complete with one cross-wise bar clamp, resilient mat and mounting screws.
Holds various size and shape containers including test tube supports Slots in the four sides accommodate both cross-wise and length-wise bar clamps Aluminum box measures 18 x 12 x 4 inches high, with rubber-covered floor. Rubber-covered clamps may be secured anywhere in the slots by wing nuts. Utility of box can be increased by the addition of one or more vertical rods with supports in the corners of the box to which a variety of containers can be clamped. Complete with one cross-wise bar clamp, resilient mat and mounting screws.
