EBERBACH CORPORATION Part No. E8520
0379V93: Glass Container w/1-Piece Bakelite Cover. 1-Liter container with working maximum of 500 ml and minimum of 75 ml. This heat resistant glass container measures 8”H x 4-2/4” dia at top. Contains a standard blending assembly (8670). Fits Waring power units 0379V94: Glass Container w/2-Piece Vinyl Cover. Like #8440 but 1150 ml container with glass handle. Unit measures 8-5/8” x 5” diameter at the top. Contains a standard blending assembly (8670). Fits Waring power units 1224E41: Blender Base for Wide Mouth or Mason Jars. Comes with one Borosilicate glass wide mouth 250 ml jar and small size blending assembly. Also available with Centrifugal Flow Blending Assembly, Order No. 8497. Fits Waring power units 0379W05: Stainless Steel Container w/ Stainless Press Fit Cover. 1-Liter container with working maximum of 500 ml and minimum of 75 ml. Container has standard blending assembly. Fits Waring power units 0379W28: 1 Liter Stainless Steel Container w/ Screw Cover and Sample Plug. 1-Liter container with working maximum of 500 ml and minimum of 75 ml. The screw cover is sealed with neoprene o-rings on both the outside diameter and sample plug. Fits Waring power units 1224E42: Semi-Micro Container, Stainless Steel with Screw Cover and neoprene cover gaskets. Same as the 8580 but with screw cover and sample plug. Fits Waring power units 0379V61: 1 Liter Blending Container Adapter for 4 liter power units, Waring Model CB-6, Eberbach 8015/8017/8018 0379V64: Stainless steel lid suitable for autoclaving. 2-liter container. As Supplied With 8070/8070-20 (HGBSS/HGB550)

EBERBACH CORPORATION Part No. E8580
Semi-Micro Container, Stainless Steel with Press Fit Lid. Total capacity is 360 ml with a maximum working volume of 250 ml and a minimum of 25 ml. Measures 6 3/4” H x 1 1/8” dia at bottom, faring to 1 15/15” on top. Complete with semi-micro blending assembly (#8730). Fits Waring power units.

EBERBACH CORPORATION Part No. E8650
Eberbach Labtools Centrifugal-Flow Blending Assembly, Order No. 8650. Stator, rotator configuration of this blending assembly forces the flow of liquids through cutting blades, causing efficient cell and tissue homogenization via high speed mechanical disruption May be used for emulsification of non-miscible liquids, re-suspension of slurries and, at lower speeds, general mixing with minimal aeration of sample May be used in all standard, small or semi-micro blending containers All metal components are made of stainless steel. For use with Waring or Eberbach blending containers.

Eberbach Corporation
Mfg Item # : E8670
1224E43: As supplied with blending containers #8440, 8442, 8490, 8500, 8510 and 8520.- Assembly has S/S blades- Blade diameter is 2-3/8". Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary in size and shape depending on the type and size of the container. Other metal parts in contact with sample material are of corrosion resistant chromium plated brass. Wrench set (Order No. 8770) is designed for easy blending assembly removal and installation. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E44: All Stainless Steel, Standard Size Blending Assembly, Order No. 8672. Like 8670, but ALL stainless steel blades, bearing holder, shaft, bearing cap and cap nut. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E45: All Stainless Steel, Small Size Blending Assembly, Order No. 8712. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E46: All Stainless Steel, Semi micro Blending Assembly, Order No. 8732. Stainless Steel Blending Assemblies are for use with highly corrosive sample materials or where metal ion contamination adversely affects sample preparations. All metal surfaces are of stainless steel. The blending assembly washers are Teflon®. The bearing is pure carbon. In order to minimize leakage of sample solution through the drive shaft/bearing interface we have added a nitrile seal below the bearing cap. Positive pressures to 32 psi may be held for extended periods thus allowing the introduction of controlled atmospheres into the container. These sealed assemblies may be used in all Eberbach and Waring containers. 1224E47: Waring® 4-Liter Blending Assembly, Order No. 8660. Less washer and lock nut; for #8020 Waring 4-Liter container. Suitable for aqueous blending applications 1224E48: Harsh Condition 4- Liter Blending Assembly, Order No. 8661. Less washer and lock nut. Suitable when using liquids that would otherwise attack the nitrile seals of the standard 4-liter assemblies

Pack of 6

STANDARD SIZE BLADES, Stainless Steel, Fits Blade Assemblies 8670/8672