Search Results
Searching for: {0}
Viewing Page 5 of 14
(133 results)
Membrane Filters 1.0um 47mm Presterile
Item #:
MFS/A100H047A
Supplier #: A100H047A
Supplier #: A100H047A
Advantec MFS Inc.
Mfg Item # : A100H047A
Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or multipack, and with or without absorbent pad. Pleated band for dispensers available. Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages and air monitoring. MCE membranes offer high recovery rates and superior flow rates. Advantec MCE membranes are high purity and Triton-free. Contrasting grid lines facilitate counting colonies and are tested to assure freedom from grid line inhibition. 3.1mm squares represent 1/100 of the filtration area of a 47mm diameter filter (9.6cm 2 ). Membranes are sterilized by ethylene oxide (EtO) gas and are available individually wrapped or in 10-pack envelopes. Membrane specifications and lot number are printed on clear cover of each filter. Advantec's continuous pleated band packaging is compatible with various membrane dispensers. Advantec membranes were developed and are manufactured to comply with the ASTM and the Standard Methods for the Examination of Water and Wastewater. Quality control tests are performed on each lot and QA Certificates are available. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : A100H047A
Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or multipack, and with or without absorbent pad. Pleated band for dispensers available. Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages and air monitoring. MCE membranes offer high recovery rates and superior flow rates. Advantec MCE membranes are high purity and Triton-free. Contrasting grid lines facilitate counting colonies and are tested to assure freedom from grid line inhibition. 3.1mm squares represent 1/100 of the filtration area of a 47mm diameter filter (9.6cm 2 ). Membranes are sterilized by ethylene oxide (EtO) gas and are available individually wrapped or in 10-pack envelopes. Membrane specifications and lot number are printed on clear cover of each filter. Advantec's continuous pleated band packaging is compatible with various membrane dispensers. Advantec membranes were developed and are manufactured to comply with the ASTM and the Standard Methods for the Examination of Water and Wastewater. Quality control tests are performed on each lot and QA Certificates are available. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Syringe Filter Acetate 50mm 0.2umSterile
Item #:
MFS/50CP020AS
Supplier #: 50CP020AS
Supplier #: 50CP020AS
Advantec MFS Inc.
Mfg Item # : 50CP020AS
• 3mm, 13mm, 25mm, 50mm • 0.10µm to 1.20µm • Minimal sample hold-up • High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Units are sterilized by EtO gas, except PES and Nylon are Gamma Irradiated. Dismic models have female luer-lock inlet and male luer slip outlet. These units are individually blister packed. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. These units are supplied individually bagged. Cellulose Acetate (CA) - Very Low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polyethersulfone (PES) - Low protein binding, low extractables, and high throughput. Maximize recovery of proteins and critical drugs. Ideal for pharmaceutical and biological applications where sample recovery and low extractables are essential. Clarify and filter sterilize biological fluids, tissue culture media, proteinaceous and enzyme solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : 50CP020AS
• 3mm, 13mm, 25mm, 50mm • 0.10µm to 1.20µm • Minimal sample hold-up • High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Units are sterilized by EtO gas, except PES and Nylon are Gamma Irradiated. Dismic models have female luer-lock inlet and male luer slip outlet. These units are individually blister packed. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. These units are supplied individually bagged. Cellulose Acetate (CA) - Very Low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polyethersulfone (PES) - Low protein binding, low extractables, and high throughput. Maximize recovery of proteins and critical drugs. Ideal for pharmaceutical and biological applications where sample recovery and low extractables are essential. Clarify and filter sterilize biological fluids, tissue culture media, proteinaceous and enzyme solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Syringe Filter 25mm 0.45um Nylon Membran
Item #:
MFS/30NP045AN
Supplier #: 30NP045AN
Supplier #: 30NP045AN
Advantec MFS Inc.
Mfg Item # : 30NP045AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : 30NP045AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Membrane Filters, MCE, 0.45um 47mm
Item #:
MFS/A045A047A
Supplier #: A045A047A
Supplier #: A045A047A
Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications for microbiological analysis and air monitoring. Pack/100
Syringe Filter, 13MM 0.20 PTFE 100/PK
Item #:
MFS/13JP020AN
Supplier #: 13JP020AN
Supplier #: 13JP020AN
Advantec MFS Part No. 13JP020AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Membrane Filter PTFE 0.2um 25mm
Item #:
MFS/J020A025A
Supplier #: J020A025A
Supplier #: J020A025A
Advantec MFS Inc.
Mfg Item # : J020A025A
Optional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks. PTFE is inert to most chemically aggressive solvents, strong acids and bases and can be used for solvent clarification and HPLC sample prep. PTFE membranes are available unsupported and supported. PTFE membranes with a laminated polypropylene web support to one side offers improved handling characteristics. Chemical and thermal limitations are imposed by the backing. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : J020A025A
Optional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks. PTFE is inert to most chemically aggressive solvents, strong acids and bases and can be used for solvent clarification and HPLC sample prep. PTFE membranes are available unsupported and supported. PTFE membranes with a laminated polypropylene web support to one side offers improved handling characteristics. Chemical and thermal limitations are imposed by the backing. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Don't see what you need or would like to request a quotation?
Click here to let us know and we'll help you find what you're looking for!The following web pages were found that match your search
Core Suppliers
2/2/2023
A & D Weighing AAPER Alcohol Ace Glass ACP Chemicals Advantec MFS Advantech Manufacturing Ahlstrom Filtration Air Gas Safety Inc. Ajay North America All-Pak Inc...
More
GCU Punchout Shopping Guide
2/9/2021
Punchout Features View Inventory View Contract Pricing View Complete Catalog Browse Our Catalog Shop GCU Core Items Using punchouts is simple... 1 2 3 To...
More