Advantec MFS Inc.
Mfg Item # : GA55110MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : GA5525MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : GF75142MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Part No. 25JP050AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : 13JP050AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Part No. 25HP045AN
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not used so you can be assured filtrates will not be adulterated. Each unit is marked with identifying codes denoting pore size, membrane, and housing polymer. Polypropylene can be autoclaved, acrylic can not. For pre-sterilized units see our sterile listing. Dismic models have female luer-lock inlet and male luer slip outlet. Labodisc-50 models are in-line units with 7-13.5 mm hose barb inlet and outlet connections and an inlet vent. Cellulose Acetate (CA) - Very low protein binding suitable for protein and enzyme solutions. Low aqueous extractables(0.1wt%). Nitrate-free for ground-water samples. Clarify and filter sterilize biological fluids, including buffers and tissue culture solutions. Mixed Cellulose Esters (MCE) - General purpose filtration of aqueous solutions, including clarifying and filter sterilizing biological fluids, buffers, and pharma applications. Offers protein binding. Provides high flow rates. Nylon (NY) - Low extractables, no wetting agents. Nylon offers broad chemical compatibility making it a good choice for HPLC sample prep. Clarify and sterilize aqueous and organic solvent solutions, including buffers and tissue culture solutions. Polytetrafluoroethylene (PTFE) - PTFE is inherently hydrophobic making this media ideal for air filtration and venting applications. Traps aqueous aerosols. Filter organic HPLC samples. PTFE-Hydrophilic - Filter aqueous solutions and organic solvents. This membrane is versatile and and compatible with solvent mixtures used in HPLC, eg. Acetonitrile/Water. PTFE-IC - Use for Ion Chromatography applications. Filter aqueous solutions and organic solvents. Offers the lowest extractables available. (units individually blister packed) Polyvinylidene Fluoride (PVDF) - General purpose filtration of aqueous solutions.Offers low extractables and good chemical compatibility. Filter biological samples and mild organic HPLC solutions. Exhibits low protein binding making it a good choice for protein recovery applications. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Part No. A045A090C
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates. Advantec MCE membranes are high purity and Triton-free. Black MCE filters are used to enumetate yeast and bacteria in carbonated beverages, wines, and water and provides a contrast between colonies and filter without the need for counterstaining. Green MCE filters offer a pale green background for viewing black, white, and colorless particles on one filter. Contrasting grid lines facilitate counting colonies and are tested to assure freedom from grid line inhibition. 3.1mm squares represent 1/100 of the filtration area of a 47mm diameter filter (9.6cm 2 ). MCE membranes are manufactured to comply with the ASTM and the Standard Methods for the Examination of Water and Wastewater.  Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Part No. A300A142C
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications for the microbiological examination of water, wastewater, pharmaceuticals, food, and beverages, and air monitoring. MCE membranes offer high recovery rates and superior flow rates. Advantec MCE membranes are high purity and Triton-free. Black MCE filters are used to enumetate yeast and bacteria in carbonated beverages, wines, and water and provides a contrast between colonies and filter without the need for counterstaining. Green MCE filters offer a pale green background for viewing black, white, and colorless particles on one filter. Contrasting grid lines facilitate counting colonies and are tested to assure freedom from grid line inhibition. 3.1mm squares represent 1/100 of the filtration area of a 47mm diameter filter (9.6cm 2 ). MCE membranes are manufactured to comply with the ASTM and the Standard Methods for the Examination of Water and Wastewater.  Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : N0118.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : N0212.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.